DivIDE 5.7 - 2k11 (Lotharek 2012)

This new SMD DivIDE is full compatible with original DivIDE 5.7c with allram support

>>> LOTHAREK's WEB PAGE <<<

JUMPERS SETTINGS

JP1 - for ZX128+2A/+3 must be in upper position
JP2 - enable system (upper position) / disconnect system + enable reflashing eeprom (lower position)

(picture A)
Setting for ZX48,128,+2(grey) and other clones. (not use this setting on +2A/+3 models !!!)
DivIDE system is enable (default)

(picture B)
Setting for ZX48,128,+2(grey) and other clones. (not use this setting on +2A/+3 models !!!)
DivIDE system is disconnect, enable reflashing eeprom, enable allram mode

(picture C)
Setting only for ZX128+2A/+3 (not use this setting on other ZX models/clones !!!)
DivIDE system is enable

(picture D)
Setting only for ZX128+2A/+3 (not use this setting on other ZX models/clones !!!)
DivIDE system is disconnect, enable reflashing eeprom, enable allram mode
In this mode is DivIDE usable with +3E rom (work as 16bit +3e ide interface)